TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 601 of 772
TM 9-2350-260-20-1-2 MANIFOLD HEATER NOZZLE REPLACEMENT (Sheet 3 of 3) INSTALLATION: NOTE On 2D engines, install new filter between bushing (A) and nozzle (B) and new filtering disc between elbow (D) and nozzle. 1. Using 13/16 inch and 5/8 inch wrenches, install bushing (A) in new nozzle (B). 2. Using 5/8 inch and 7/16 inch wrenches, install elbow (C) to bushing (A). 3. Using 7/16 inch wrench, install elbow (D) into nozzle (B). 4. Install nozzle (B) and fittings into manifold heater (E). 5. Aline nozzle for ease of connecting fuel lines. Using 1 inch wrench, tighten jamnut (F). 6. Using two 7/16 inch wrenches, connect inlet fuel line (G) to elbow (C). 7. Using 7/16 inch and 9/16 inch wrenches, install return fuel line (H) to elbow (D). 8. Perform manifold heater operational check (page 7-324). 9. Install 2A powerplant (page 5-14) or 2D powerplant (page 5-40). End of Task TA148407 7-332