TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 588 of 772
TM 9-2350-260-20-1-2 PRIMER PUMP INLET TEE REPLACEMENT (Sheet 1 of 1) TOOLS: 5/8 in. combination box and open end wrench 8 in. adjustable wrench (crescent) 9/16 in. combination box and open end wrench SUPPLIES: Rags (Item 65, Appendix D) PRELIMINARY PROCEDURES: Shut off fuel supply to primer pump (TM 9-2350-260-10) REMOVAL: CAUTION Do not move tube assemblies which may cause bending. 1. Using crescent wrench to hold tee (A), use 5/8 inch wrench to disconnect fitting (B) from tee (A). Move fitting (B) and tube assembly away from tee. 2. Using 5/8 inch wrench, disconnect fitting (C) from tee (B). Move fitting (C) and tube assembly away from tee. 3. Using 9/16 inch wrench, remove line (D). 4. Using 9/16 inch wrench, remove adapter (E). 5. Using crescent wrench, loosen tee (A) from primer pump (F) and remove. INSTALLATION: 1. Using crescent wrench, install tee (A) into primer pump (F). 2. Using 9/16 inch wrench, install adapter (E) into primer pump (F). 3. Using 9/16 inch wrench, install line (D) in primer pump (F). 4. Using 5/8 inch wrench, install fitting (C) with tube assembly to tee (A). 5. Using 5/8 inch wrench, install fitting (B) with tube assembly to tee (A). End of Task TA148394 7-319