TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 587 of 772
TM 9-2350-260-20-1-2 PERSONNEL HEATER FUEL LINE REPLACEMENT (Sheet 3 of 3) INSTALLATION: 1. Position tube assembly (A) in tank. 2. Using 5/8 inch wrench, install tube assembly (A) on elbow (B) and tighten securely. NOTE Be sure to inspect the routing of tube assembly (A) from personnel heater fuel pump to primer pump. Make sure it is not bent or crimped. 3. Using 5/8 inch wrench, connect fitting (C) to tee (D) of the primer pump (E) and tighten securely. 4. Install clamp (F) on tube (A). 5. Using 7/16 inch wrench, install screw and new lockwasher (G) through clamp (F) and tighten. 6. Wipe up any fuel spills. End of Task TA148393 7-318