TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 581 of 772
TM 9-2350-260-20-1-2 FUEL PRIMER INLET LINE TUBE ASSEMBLY REPLACEMENT (Sheet 2 of 5) NOTE Fuel primer inlet line tube assembly on some tanks may be one solid tube. If your tank has solid tube, skip steps 2 through 10 and go on to step 11. To replace solid tube, order three tube sections and two nipples. 2. Using socket, remove screw and lockwasher (D). Remove clamp (E). Throw lockwasher away. 3. Using 5/8 inch wrench, hold nipple (F). 4. Using 5/8 inch wrench, remove two nuts (G) and (H). 5. Remove tube assembly (C). NOTE Traverse turret as necessary to get at the following parts. NOTE It may be necessary to slightly bend tube assembly (A) before it can be placed in position. 6. Using socket, remove screw and lockwasher (J). Remove clamp (K). Throw lockwasher away. 7. Using 7/16 inch wrench, remove screw and lockwasher (L). Remove clamp (M). Throw lockwasher away. 8. Using 5/8 inch wrench, hold nipple (N). 9. Using 5/8 inch wrench, remove nuts (P) and (Q) from nipple (N). 10. Remove tube assembly (R). Go on to Sheet 3 TA148387 7-312