TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 579 of 772
TM 9-2350-260-20-1-2 PRIMARY FUEL FILTER ELEMENT REPLACEMENT (2D ENGINE) (Sheet 5 of 5) 8. Using another person, set FUEL PUMPS switch (L) on master control panel at driver's station to ON. 9. Set MASTER CONTROL switch (M) to ON and observe air release (bubbles) from bleed cap (K). 10. Set MASTER CONTROL switch (M) to OFF and, after about 1 minute, repeat step 9. 11. Repeat steps 9 and 10 until a steady flow of fuel comes out of bleed cap (K), then close bleed cap (K) and set MASTER CONTROL switch to OFF. 12. Using adjustable wrench, tighten bleed cap (K) enough so it cannot be opened with the fingers. 13. Close front left intake grille door (TM 9-2350-260-10). End of Task TA148385 7-310