TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 566 of 772
TM 9-2350-260-20-1-2 FUEL-WATER SEPARATOR FILTER ELEMENT REPLACEMENT (Sheet 2 of 6) REMOVAL: NOTE Replacement of outer filter elements is required semi-annually or every 1500 miles of tank operation. Center filter element is to be replaced annually. NOTE When removing cover, make sure not to let any dirt fall into fuel-water separator. 1. Using 7/16 inch wrench, remove eight screws (A), lockwashers (B), and fat washers (C). Throw lockwashers away. 2. Remove cover (D) from fuel-water separator (E). 3. Remove preformed packing (F) from cover (D). Throw packing away. 4. Place container under fuel-water separator (E) to catch fuel from fuel outlet line. 5. Using 7/8 inch wrench, disconnect fuel outlet line (G) from elbow (H). 6. Using rags (Item 65, Appendix D), cover fuel outlet line (G) to prevent dirt getting into line. Go on to Sheet 3 TA148372 7-297