TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 558 of 772
TM 9-2350-260-20-1-2 FUEL-WATER SEPARATOR CONTROL ASSEMBLY REPLACEMENT (2D ENGINE) (Sheet 2 of 8) REMOVAL: 1. Place drip pan under manual drain valve (A). 2. Open manual drain valve (A) by turning valve handle to the left. 3. Using 7/16 inch wrench, turn fuel-water separator bleed cap (B) to the left until loose. 4. Allow fuel in fuel-water separator filter (C) to drain through manual drain valve (A). 5. Using 7/16 inch wrench, turn fuel-water separator bleed cap (B) to the right until snug. 6. Close manual drain valve (A) by turning valve handle to the right. 7. Remove drip pan placed under manual drain valve (A). Go on to Sheet 3 TA148364 7-289