TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 549 of 772
TM 9-2350-260-20-1-2 FUEL-WATER SEPARATOR DRAIN SOLENOID VALVE REPLACEMENT (2D ENGINE) (Sheet 2 of 3) 3. Using 7/16 inch wrench, turn fuel-water separator bleed cap (B) counterclockwise until loose. 4. Allow fuel in fuel-water separator filter (C) to drain through drain valve (A). 5. Move drip pan to catch fuel from hose assembly D). 6. Using two 9/16 inch wrenches, disconnect hose assembly (D) from solenoid valve (E). 7. Using pliers, disconnect electrical lead (F) from solenoid valve (E). 8. Using 5/16 inch wrench, remove two screws and washers (G) securing solenoid valve (E) to bracket. Throw washers (G) away. 9. Remove solenoid valve (E). NOTE It will be necessary to secure solenoid valve (E) in vise. 10. Using 9/16 inch wrench, remove elbow and tube (H) as a unit from solenoid valve (E). 11. Using 9/16 inch wrench, remove adapter (J) from solenoid valve (E). Go on to Sheet 3 TA148355 7-280