TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 543 of 772
TM 9-2350-260-20-1-2 FUEL PUMP-TO-FUEL-WATER SEPARATOR HOSE ASSEMBLY REPLACEMENT (Sheet 2 of 5) REMOVAL: 1. Place drain pan and rags as required under manual drain valve (A). 2. Open manual drain valve (A) by turning valve handle counterclockwise. 3. Using 7/16 inch wrench, turn fuel-water separator bleed cap (B) counterclockwise until loose. 4. Allow fuel in fuel-water separator filter (C) to drain through manual drain valve (A). 5. Using 7/16 inch wrench, turn bleed cap (B) clockwise until snug. 6. Close manual drain valve (A) by turning valve handle clockwise. Go on to Sheet 3 TA148349 7-274