TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 541 of 772
TM 9-2350-260-20-1-2 FUEL-WATER SEPARATOR FUEL FILTER OUTLET HOSE ASSEMBLY REPLACEMENT (Sheet 3 of 3) INSTALLATION: 1. Coat threads of bulkhead elbow (A) with sealing compound (Item 27, Appendix D). 2. Using fingers, install hose assembly (B) on bulkhead elbow (A). 3. Using 7/8 inch wrench, tighten nut (C) of hose assembly (B) on bulkhead elbow (A). 4. Coat threads of fuel-water separator fuel filter outlet elbow (D) with sealing compound (Item 27, Appendix D). 5. Using fingers, install hose assembly (B) on fuel- water separator fuel filter outlet elbow (D). 6. Using 7/8 inch wrench, tighten nut of hose assembly (B) on fuel-water separator fuel filter outlet elbow (D). 7. Using fingers, install hose clamp (E) on hose assembly (B). 8. Using fingers, install hose clamp (E) and hose assembly (B) on mounting stud (F). 9. Using 9/16 inch wrench, install new self-locking nut (G) on hose clamp (E) and mounting stud (F). 10. Perform powerplant test run (page 5-65). 11. Install 2A powerplant (page 5-14) or 2D powerplant (page 5-40). End of Task TA148347 7-272