Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 53 of 772

TM 9-2350-260-20-1-2 POWERPLANT REPLACEMENT (2D ENGINE) (Sheet 18 of 26) 16. Using 1-1/2 inch socket, install two flat washers (D), two new lockwashers (E) and two capscrews (F). 17. Using torque wrench and 1-1/2 inch socket, tighten two capscrews (F) 360-380 lb-Ft (48515 N.•m). 18. Have one person hold universal joint gears In alinement with final drive adapter while another person, using pinch bar, pries final drive adapter away from final drive into universal joint (each side). 19. Fit quick-disconnect ring (G) around final drive adapter. NOTE When installing screw (H) hold onto quick-disconnect ring (J) or it will snap open and fall into engine compartment. 20. Instal screw (H). Using 3/4 inch socket, tighten screw on both sides of tank. 21. String new lockwire (J) (Item 60, Appendix D) through screw (H) and opening quick-disconnect ring (G) on both sides of tank. Go on to Sheet 19 TA147944 5-43