TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 514 of 772
TM 9-2350-260-20-1-2 FUEL-WATER SEPARATOR OPERATIONAL TESTS (2D ENGINE) (Sheet 1 of 11) PROCEDURE INDEX PROCEDURE PAGE Manual Drain Test 7-246 Automatic Drain Test 7-248 15-Second Drain Test 7-250 Sequential Drain Test 7-252 TOOLS: Slip joint pliers Ratchet with 1/2 in. drive 6 in. adjustable wrench 1/2 in. combination box and open end wrench 1/2 in. socket with 1/2 in. drive 7/16 in. combination box and open end wrench 5 in. extension with 1/2 in. drive 9/16 in. combination box and open end wrench FABRICATED TOOLS: One 3 ft cable (Figure F-8, Appendix F) One 10 ft cable (Figure F-7, Appendix F) SUPPLIES: 24 vdc power source Drip pan 1/8 in. pipe plug (2 required) Lockwasher (7410218) (4 required) Metal containers Lockwasher (11657469) (8 required) (1 gal. capacity) (2 required) Gasket (part of kit 5702738) Fuel can (1 gal. capacity) Lockwashers (11657469-3) (8 required) Watch with second hand Parts kit (5702738) PERSONNEL: Two PRELIMINARY PROCEDURE: Remove 2D powerplant (page 5-27) Go on to Sheet 2 TA148320 7-245