TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 508 of 772
TM 9-2350-260-20-1-2 SECONDARY FUEL FILTER ASSEMBLY REPLACEMENT (Sheet 2 of 3) REMOVAL: 1. Place suitable container beneath secondary fuel filter to catch fuel from filters and tubes. 2. Using 5/8 inch wrench, remove nut (A) from tee (B). 3. Using 7/16 inch wrench to hold tee (B) and 5/8 inch wrench, remove nut (C). 4. Using 1/2 inch wrench to hold adapter (D) and 5/8 inch wrench, remove nut (E). 5. Remove tube assembly (F). 6. Using 7/16 inch wrench, remove tee (B) from filter assembly (G). 7. Using 1/2 inch wrench, remove adapter (D) from filter assembly (G). 8. Using 7/8 inch wrench, loosen two nuts (H) and remove two hose assemblies (J) from elbows (K). 9. Using 7/8 inch wrench to hold adapters (L) and 3/4 inch wrench, remove two elbows (K). 10. Using 7/8 inch wrench, remove two adapters (L). 11. Using 9/16 inch socket, remove four screws (M) and four lockwashers (N). Throw lockwashers away. 12. Remove filter assembly (G) from powerplant. Go on to Sheet 3 TA148314 7-239