TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 486 of 772
TM 9-2350-260-20-1-2 INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 3 of 5) 10. Using 1 inch wrench on fuel line (P) and 7/8 inch wrench on elbow (Q), loosen fuel line (P) from elbow (Q). 11. Using 7/8 inch wrench, remove elbow (Q) from check valve (N). Use vise if necessary. 12. Using 7/16 inch socket, remove screw, lockwasher, and washer (S) holding clamp (T) to fuel tank. Throw lockwasher away. 13. Remove clamp (T) from fuel line (L). 14. Using 1 inch wrench on fuel line (L) and 7/8 inch wrench on elbow (R), loosen fuel line (L) from elbow (R) (located behind left fuel tank rear mount). 15. Using 7/8 inch wrench, remove elbow (R) from left fuel tank. 16. Remove fuel line (L). INSPECTION: Inspect threaded parts for bad threads. Check tubing for cracks or bends. Replace defective parts. INSTALLATION: 1. Using 7/8 inch wrench, install elbow (A) to left fuel tank. 2. Using 1 inch wrench, install fuel line (B) to elbow (A). Go on to Sheet 4 TA148292 7-217