TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 485 of 772
TM 9-2350-260-20-1-2 INTER-TANK SWING CHECK VALVE REPLACEMENT (Sheet 2 of 5) NOTE If your tank has 2A powerplant. skip steps 3 thru 6 and go on to step 7. 3. Using 9/16 inch socket and 9/16 inch wrench, remove screw (F) and nut and lockwasher (G) holding clamp (H) to bracket (J). Throw lockwasher away. 4. Remove clamp (H) from hose (C). 5. Using 9/16 inch socket, remove screw, lockwasher, and washer (K) holding bracket (J) to hull. Throw lockwasher away. 6. Remove bracket (J). 7. Using 1 inch wrench on fuel hose (L) and 7/8 inch wrench on elbow (M), loosen fuel line (L) from elbow (M). 8. Using 7/8 inch wrench on fuel hose (C) coupling nut and 1-1/4 inch wrench on check valve (N), remove fuel hose (C). 9. Using 1-1/4 inch wrench on check valve (N) and 7/8 inch wrench on elbow (M), remove elbow (M). Use vise if necessary. Go on to Sheet 3 TA148291 7-216