TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 464 of 772
TM 9-2350-260-20-1-2 FUEL SHUTOFF VALVE, LEVER, LINK, AND BRACKET REPLACEMENT (Sheet 4 of 9) 12. Using 7/16 inch wrench and 7/16 inch socket with extension, remove two nuts and lockwashers (P) and two screws (Q). Throw lockwashers away. 13. Remove fuel shutoff valve from bracket (R). 14. Using 1/2 inch socket with extension, remove two screws (S), lockwashers (T), and flat washers (U) holding bracket (R). Throw lockwashers (T) away. 15. Remove fuel shutoff valve and bracket (B) from tank. 16. Manually install fuel shutoff valve into vise. 17. Using hammer and drive pin punch, start spring pin (U) out of lever (D). 18. Using pliers, remove spring pin (U) from lever (D). Throw pin away. 19. Manually remove lever (D) from fuel shutoff valve. Go on to Sheet 5 TA148270 7-195