TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 453 of 772
TM 9-2350-260-20-1-2 FUEL TANK (LEFT AND RIGHT) DRAIN PLUG REPLACEMENT (Sheet 1 of 1) TOOLS: 10 in. extension with 1/2 in. drive Hinged handle with 1/2 in. drive 3/4 in. combination box and open end wrench SUPPLIES: Grease (Item 36, Appendix D) Lockwasher (MS35338-67) (4 required) PRELIMINARY PROCEDURE: Drain fuel tanks (page 7-153) REMOVAL: 1. Using wrench, remove four screws (A) and lockwashers (B). Hold access cover to keep from falling. Throw lockwashers away. 2. Remove access cover (C) and gasket (D). 3. Using extension and handle, remove drain plug (E). INSPECTION: Inspect fuel drain plug for stripped threads or damaged flats. Throw unserviceable plug away. INSTALLATION: 1. Coat fuel drain plug threads with grease (Item 36, Appendix D). 2. Using extension and hinge handle, install fuel drain plug (E). 3. Install fuel drain access cover (C) and gasket (D). Secure with four screws (A) and new lockwashers (B). 4. Using wrench, tighten four screws (A). 5. Fill fuel tanks. End of Task TA148259 7-184