TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 446 of 772
TM 9-2350-260-20-1-2 FUEL TANK PLUG AND BRACKET REPLACEMENT (Sheet 2 of 3) 4. Using 1/2 inch socket and 1/2 inch wrench, remove screw (J) and nut (K) holding clamps (L) and (M). 5. Remove clamps (L) and (M). 6. Remove bracket (F) from fuel tank. INSTALLATION: 1. Using 9/16 inch wrench, install plug (A) in fuel tank (B). 2. Install hose clamps (C) and (D) to bracket (G) using screw (E) and nut (F). 3. Using 1/2 inch socket and 1/2 inch wrench, tighten screw (E) and nut (F). 4. Install bracket (G) using two screws (H), washers (J), and new lockwashers (K). 5. Using 1/2 inch socket, tighten screws (H). Go on to Sheet 3 TA148252 7-177