Sign up to sell your inventory with NSN Lookup

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 445 of 772

TM 9-2350-260-20-1-2 FUEL TANK PLUG AND BRACKET REPLACEMENT (Sheet 1 of 3) TOOLS: Ratchet with 1/2 in. drive 1/2 in. socket with 1/2 in. drive 1/2 in. combination box and open end wrench 3/4 in. socket with 1/2 in. drive 9/16 in. combination box and open end wrench Stud remover SUPPLIES: Lockwasher (MS35338-45) (2 require REFERENCE: TM 9-2350-260-10 REMOVAL: 1. Using 3/4 inch socket, loosen bolt (A) holding doors (B). Open three doors (B) to gain access to left fuel tank. 2. Using 1/2 inch socket, remove two screws (C), washers (D), and lockwashers (E) holding bracket (F) to fuel tank (G). Throw lockwashers away. NOTE If flats of plug (H) are badly rounded or deformed, throw plug away. 3. Using 9/16 inch wrench or stud remover, remove plug (H) from fuel tank (G). Go to Sheet 2 TA148251 7-176