Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 427 of 772

TM 9-2350-260-20-1-2 DRAINING FUEL TANK AND REMOVING CONDENSATE (Sheet 6 of 7) 4. Operate pump handle (E) several times to drain any fuel left in hoses (D) and (F) and hand fuel pump (G). 5. Remove discharge hose (F) from 55 gallon drum (H), and let hose hang over side of tank. 6. Using fingers in clamp rings (J), pull clamps (K) out and down to loosen discharge connector (L). 7. Remove discharge hose (E) from pump discharge connector (L). 8. Repeat steps 6 and 7 for removal of suction hose. 9. Install dust cover (M) on discharge connector (L). 10. Using fingers in clamp rings (J), pull clamps (K) out and up against dust cover (M) to clamp dust cover in place. 11. Repeat steps 9 and 10 for installing dust cover on hand fuel pump suction connector and hoses. Go on to Sheet 7 TA148233 7-158