TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 385 of 772
TM 9-2350-260-20-1-2 AIR CLEANER (ALUMINUM AND SIDE LOADING) CIRCUIT BREAKER REPLACEMENT (Sheet 1 of 1) TOOL: Flat-tip screwdriver SUPPLIES: Lockwasher (MS35335-17) (4 required) REFERENCE: TM 9-2350-260-10 PRELIMINARY PROCEDURE: Remove air cleaner cover and gasket (page 7-132, steps 1 thru 3) REMOVAL: 1. Using screwdriver, remove four screws (A) and lockwashers (B) securing two circuit breakers (C) to cover (D). Throw lockwashers away. 2. Remove two circuit breaker. (C). INSTALLATION: 1. Position two circuit breakers (C) onto cover (D). 2. Install new lockwashers (B) and screws (A) to secure circuit breakers (C) to cover (D). Using screwdriver, tighten screws (A). 3. Install cover and gasket (page 7-133, steps 3, 4, 8, and 9). 4. Check operation of blowers (TM 9-2350-260-10). End of Task TA148191 7-116