TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 374 of 772
TM 9-2350-260-20-1-2 AIR CLEANER FILTER LOCKING ROD HANDLE OR SPRING REPLACEMENT (SIDE LOADING) (Sheet 1 of 1) TOOLS: 9/16 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive 7/16 in. socket with 1/2 in. drive PRELIMINARY PROCEDURES: Remove air cleaner filter assembly (page 7-106). REMOVAL: 1. Using 7/16 inch socket, remove eight assembled washer screws (A) securing four springs (B). 2. Remove four springs (B) and rod assembly (C) from air filter compartment. 3. Remove springs (B) from rod assembly (C), and replace defective components as necessary. INSTALLATION: 1. Position four springs (B) onto rod assembly (C) as indicated. 2. Position springs (B) and rod assembly (C) into air filter compartment. 3. Using 7/16 inch socket, install eight assembled washer screws (A) to secure springs (B) to inside of air cleaner housing. 4. Install air cleaner filter assembly (page 7-109). End of Task TA148180 7-105