TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 370 of 772
TM 9-2350-260-20-1-2 AIR CLEANER DOOR REPLACEMENT (SIDE LOADING) (Sheet 1 of 2) TOOLS: 9/16 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive Pliers, slip-joint Punch, drive pin Hammer, ball peen SUPPLIES: Adhesive (Item 2, Appendix D) Gasket (10887603) Lockwasher (MS35333-38) (2 required) Dry cleaning solvent (Item 54, Appendix D) PRELIMINARY PROCEDURE: Remove air cleaner (page 7-88) REMOVAL: 1. Using 9/16 inch socket, remove two screws, lockwashers, and flat washers (A) securing door (B). Throw lockwashers away. 2. Open door (B). NOTE Air cleaner must be positioned to allow you to drive out pin (C). 3. Using hammer and punch, drive out pin (C) securing door (B) to air cleaner housing. If necessary, use pliers to completely remove pin. 4. Remove door. Go on to Sheet 2 TA148176 7-101