TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 368 of 772
TM 9-2350-260-20-1-2 AIR CLEANER REPLACEMENT (TOP LOADING) (Sheet 7 of 8) 10. Position fender skirt (H). 11. Using 9/16 inch socket, install two new locknuts J) and washers K) to hold fender skirt (H) to both outriggers. 12. Coat four screws (L) with lubricant (Item 40, Appendix D). 13. Using 9/16 inch socket, install four new self- locking bolts (L) and washers (M) to hold fender skirt (H) to air cleaner (N). 14. Using torque wrench and 9/16 inch socket, tighten four screws (L) to 20-30 lb-ft (27-41 N•m). 15. Install washer (P) and bolt (Q from top of fender skirt. 16. Install bolt (Q) through washer (P) and fender skirt. 17. Place washer (R), new lockwasher (S), and nut (T) on bolt (Q). Using 9/16 inch socket on bolt (Q) and 9/16 inch open end wrench on nut (T), tighten nut (T). Go on to Sheet 8 TA148174 7-99