TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 359 of 772
TM 9-2350-260-20-1-2 AIR CLEANER REPLACEMENT (SIDE LOADING) (Sheet 4 of 6) 12. Using 9/16 inch socket and 10 inch extension, remove six screws (W) and flat washers (X). CAUTION Be sure to guide electrical lead out of hole in hull when removing air cleaner. 13. Using one person t operate hoist, have two people guide air cleaner and lift it off tank. 14. Remove air cleaner outlet elbow (page 7-76). 15. Remove air cleaner inlet elbow (page 7-79). INSTALLATION: NOTE Clean mounting area before installing air cleaner. 1. Install air cleaner outlet elbow (page 7-77). 2. Install air cleaner inlet elbow (page 7-81). 3. Attach a two-point sling (A) to air cleaner (B) and hoist C). 4. Open grille doors (TM 9-2350-260-10). 5. Attach lockwire (Item 59, Appendix D) to electrical lead (D) of air cleaner. Thread lockwire through hole in hull and pull wire and electrical lead (D) through hole as two people position air cleaner onto mounting. 6. Close grille doors after air cleaner is positioned. Go on to Sheet 5 TA148165 7-90