TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 351 of 772
TM 9-2350-260-20-1-2 AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 1 of 5) PROCEDURE INDEX PROCEDURE PAGE Removal 7-83 Installation 7-85 TOOLS: 9/16 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive 5 in. extension with 1/2 in. drive 1/2 in. socket with 1/2 in. drive Flat-tip screwdriver Putty knife 3/8 in. combination box and open end wrench Universal joint with 1/2 in. drive SUPPLIES: Gasket (11591585) (2 required) Gasket (8762871) Gasket (10863870) Adhesive (Item 2, Appendix D) Rags Lockwasher (MS35333-41) (4 required) Lockwasher (MS35338-46) (14 required) Screws (MS90725-32) (4 required) (Early M60 only) REFERENCE: TM 9-2350-260-10 PRELIMINARY PROCEDURES: Traverse turret so gun tube points over left or right side of tank (TM 9-2350-260-10) Open top deck grille doors (TM 9-2350-260-10) NOTE Removal of left or right intake hose is same. Left side shown. Go on to Sheet 2 TA148157 7-82