TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 337 of 772
TM 9-2350-260-20-1-2 PERSONNEL HEATER FUEL PUMP REPLACEMENT (Sheet 2 of 3) 4. Using 5/8 inch wrench, loosen nut (E). 5. Disconnect hose (F) from elbow. 6. Using socket, loosen two screws (G), while holding nuts (H) with 7/16 inch wrench. 7. Remove two nuts (H) and two lockwashers (J). Throw lockwashers away. 8. Lift fuel pump (K) along with two screws (G), flat washer (L), and condenser bracket from mounting place. NOTE Using chalk, mark direction each elbow is pointing on body of fuel pump. 9. Using 1/2 inch wrench, remove elbow (M) from pump (K). 10. Using 7/16 inch wrench, remove elbow (N) from pump (K). Go on to Sheet 3 TA148143 7-68