TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 336 of 772
TM 9-2350-260-20-1-2 PERSONNEL HEATER FUEL PUMP REPLACEMENT (Sheet 1 of 3) TOOLS: 9/16 in. combination box and open Ratchet with 1/2 in. drive end wrench 5 in. extension with 1/2 in. drive 5/8 in. combination box and open 7/16 in. combination box and open end wrench end wrench 1/2 in. combination box and open end wrench 7/16 in. socket with 1/2 in. drive SUPPLIES: Container Chalk Lockwasher (MS35338-44) (2 required) REFERENCE: TM 9-2350-260-10 PRELIMINARY PROCEDURE: Turn MASTER HEATER switch OFF REMOVAL: 1. Pull electrical plug (A) from harness connector (B). 2. Using 9/16 inch wrench, loosen tube nut (C). NOTE Before doing step 3, have container ready to catch any excess fuel. 3. Disconnect tube (D) from elbow. Go on to Sheet 2 TA148142 7-67