TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 333 of 772
TM 9-2350-260-20-1-2 FUEL PUMP REPLACEMENT. RIGHT FUEL TANK (Sheet 4 of 6) INSTALLATION: 1. Position packing (A) around pump (B), and using hands install clamps (C) around packing (A) and pump (B). 2. Using screwdriver and 3/8 inch wrench, secure ground lead (D) to fuel pump (B) with screw (E), new lockwasher (F), and nut (G). 3. Using 7/16 inch socket, secure clamp (H) to bracket (J) with two screws (K) and two new lockwashers (L). 4. Position fuel pump (B) in mounting bracket (J) so that pump discharge port (M) will be directly beneath stamped lettering 'PUMP DISCHARGE LOCATION' on access cover (N). Lock pump in bracket by closing clamp lever (P). 5. Position new gasket (Q) on mounting bracket (J). Apply sealing compound (Item 28, Appendix D) to threads of one screw (R). Install one screw (R) through access cover (N) and new gasket (Q) into mounting bracket (J). Leave screw (R) loose. Go on to Sheet 5 TA148139 7-64