TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 330 of 772
TM 9-2350-260-20-1-2 FUEL PUMP REPLACEMENT - RIGHT FUEL TANK (Sheet 1 of 6) PROCEDURE INDEX PROCEDURE PAGE Removal 7-61 Installation 7-64 TOOLS: 7/16 in. socket with 1/2 in. drive 1/2 in. socket with 1/2 in. drive 9/16 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N•m) Diagonal cutting pliers Flat-tip screwdriver Offset fat-tip screwdriver 3/8 in. combination box and open end wrench Cross-tip screwdriver SUPPLIES: Sealing compound (Item 28, Appendix D) Silicone compound (Item 32, Appendix D) Lockwire (Item 59, Appendix D) Gasket (10873918) Gasket (11637078) Lockwasher (MS35333-38) Lockwasher (MS35338-44) (2 required) REFERENCE: TM 9-2350-260-10 PRELIMINARY PROCEDURES: Isolate right fuel tank (TM 9-2350-260-10) Drain right fuel tank (page 7-152) REMOVAL: 1. Open turret platform access door (A) (TM 9-2350- 260-10). 2. Traverse turret to gain access t cover (B) in subfloor over right fuel tank (TM 9-2350-260-10). 3. Using offset flat-tip screwdriver, remove 14 screws securing access cover (B). Remove access cover. Go on to Sheet 2 TA148136 7-61