TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 292 of 772
TM 9-2350-260-20-1-2 FUEL RETURN LINES REPLACEMENT (2D ENGINE) (Sheet 2 of 10) REMOVAL: NOTE Left and right side fuel return lines are removed the same except for fuel return lines (A) and (B) on right side. For left side fuel return lines removal, go to step 5, skip steps 1 through 4. 1. Using 1/2 inch wrench, remove screw and washer (C) securing clamp (D). 2. Place drip pan under fuel filter (E). 3. Using 9/16 inch wrench, disconnect fuel return line (A) at fuel filter (E) and let fuel drain. 4. Using 9/16 inch wrench, remove fuel return line (A). 5. Remove clamp (D) from fuel return line (A). Go on to Sheet 3 TA148098 7-23