Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 289 of 772

TM 9-2350-260-20-1-2 FUEL RETURN LINES REPLACEMENT (2A ENGINE) (Sheet 6 of 7) 5. Using 9/16 inch wrench, connect and secure tube assembly (F) to tube cross (B). 6. Using 9/16 inch wrench, connect and secure tube assembly (G) to tube cross (B). 7. Using 9/16 inch wrench, connect tube assembly (H) to elbow (A). 8. Using 14-/16 inch wrench on check valve (J) and 7/8 inch wrench on hose fitting (K), connect hose (L) to check valve (J). 9. Using 1-/16 inch wrench, secure check valve (J) with hose (L) attached to elbow (M). 10. Install clamp (N) onto hose (L). 11. Using 1/2 inch wrench and 1/2 inch socket, install and secure clamps with screw and washer (P) and nut (Q). 12. Using 7/8 inch wrench, connect and secure hose (L) to tube cross (B). Go on to Sheet 7 TA148095 7-20