TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 282 of 772
TM 9-2350-260-20-1-2 INSPECT FUEL INJECTOR NOZZLES AND HOLDERS (Sheet 2 of 3) CAUTION Do not exceed 700 to 750 rpm and do not run engine for more than 10 minutes at a time. Before restarting, allow engine to cool. 2. Start engine (TM 9-2350-260-10). 3. Place hand between nozzle heads (D) and top of holders (E) on each fuel injector. If movement is felt, stop the engine. If movement is not felt, go to step 7. 4. Using torque wrench (F) and fixed open end wrench (G) (Item 3, Chapter 3, Section I) tighten nozzle holders (E) to 42 lb-ft (57 N•m). 5. Start engine (TM 9-2350-260-10). 6. Place hand between nozzle heads (D) and top of holders (E) on each fuel injector. If movement is still felt, notify support maintenance. Go on to Sheet 3 TA148088 7-13