TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 28 of 772
TM 9-2350-260-20-1-2 POWERPLANT REPLACEMENT (2A ENGINE) Sheet 17 of 24) NOTE When installing screw (K), hold onto quick-disconnect ring (J) or it will snap open and fall down into engine compartment. 22. Install screw (K). Using 3/4 inch socket, tighten screw on both sides of tank. 23. String new lockwire (L) (Item 60, Appendix D) through screw (K) and opening in quick-disconnect ring (J) on both sides of tank. 24. Reach between transmission and under left transmission mount and remove protective coverings from fuel return line (M) openings. 25. Reach between transmission and under left transmission mount and manually connect quick- disconnect (M). NOTE It may be necessary to reach between left transmission mount and universal joint to connect quick- disconnect (M). 26. Raise guide lock latches. 27. Push powerplant guide (D) forward until lockring snaps into place. Guide is now locked into position. Go on to Sheet 18 TA147919 5-18