TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 278 of 772
TM 9-2350-260-20-1-2 PURGE FUEL SYSTEM (2A ENGINE) (Sheet 3 of 3) 8. Turn MASTER CONTROL switch ON, set FUEL PUMPS switch ON (TM 9-2350-260-10). 9. Disconnect drain hoses (C) from retaining bracket (D). 10. Unwind hoses (C) from support brackets (E) and place ends of tubes (C) into container. 11. Open fuel drain valves (F) by pulling valve arms outward and let fuel continue to flow until pure fuel i being discharged (about 3 quarts). WARNING Make sure valves (F) are closed. Failure to close valves will cause fuel to be pumped into hull creating a fire hazard. 12. Close fuel drain valves F). 13. Rewind hoses (C) around support brackets (E). 14. Connect ends of hoses (C) to retaining bracket (D). 15. Turn MASTER CONTROL switch OFF. 16. Install engine upper access cover (page 16-44). 17. Close grille doors (TM 9-2350-260-10). End of Task TA148084 7-9