TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 268 of 772
TM 9-2350-260-20-1-2 OIL COOLERS - CLEANING (Sheet 1 of 3) TOOLS: Oil cooler cleaning tool SUPPLIES: Detergent (Item 33, Appendix D) Water source 50 to 90 psi air supply Water hose Container for cleaning solution REFERENCE: TM 9-2350-260-10 PRELIMINARY PROCEDURES: Remove top deck (page 16-20) Remove engine shroud (page 9-2) Remove engine access covers (2A engine, pages 6-77 and 684) (2D engine, pages 6-79 and 6-88) Open hull drains (TM 9-2350-260-10) CLEANING: NOTE For any engine, the oil cooler cleaning tool will clean the two engine oil coolers as well as the two transmission oil coolers with the powerplant in or out of the tank. This applies to both the 2A and the 2D engines. If oil coolers are to be cleaned with powerplant removed, oil cooler screens must be removed as part of preliminary procedures (pages 6-116 and 6-118). WARNING Always wear safety glasses or goggles when cleaning oil coolers to prevent dirt particles and cleaning agent from splashing in eyes. Go on to Sheet 2 TA147637 6-191