TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 258 of 772
TM 9-2350-260-20-1-2 ENGINE TO TRANSMISSION OIL LINE TUBE ASSEMBLIES (INNER AND OUTER) REPLACEMENT (2A ENGINE) (Sheet 4 of 5) INSTALLATION: 1. Position new gaskets (A) and (B) onto adapters (C) and (D). 2. Using 1-5/8 inch wrench, install adapter (C) into transmission oil line mount (E). 3. Using 1-5/8 inch wrench, install adapter (D) into transmission oil line mount (E). 4. Position tube assembly (F) through engine shroud and, using 1-1/2 inch wrench on connector (G), tighten connector (G) onto adapter (C). 5. Position tube assembly (H) through engine shroud and, using 1-1/2 inch wrench on connector (J), tighten connector (J) onto adapter (D). 6. Position new washers (K) and (L) onto adapters (M) and (N). 7. Using 1-5/8 inch wrench, install adapter (M) to oil cooler (P). 8. Using 1-5/8 inch wrench, install adapter (N) to oil cooler (P). Go on to Sheet 5 TA147627 6-181