TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 254 of 772
TM 9-2350-260-20-1-2 THERMOSTATIC TRANSMISSION OIL COOLER VALVE ASSEMBLY (LEFT SIDE) TEST AND REPLACEMENT (2D ENGINE) (Sheet 6 of 6) 7. At other end of tube (E), using 1-1/2 inch wrench, install tube end fitting (F) on adapter (G). 8. Using 1-1/2 inch wrench, tighten tube end fitting (D) at oil cooler. 9. Using 1-5/8 inch wrench, install adapter (H). 10. Using hands, install tube end fitting (J) on adapter (H). 11. Go to other end of tube (K) and, using 1-1/2 inch wrench, install tube end fitting (L) on adapter (M). 12. Using 1-1/2 inch wrench, tighten tube end fitting (J) at oil cooler. 13. Replenish oil lost during valve assembly replacement (LO 9-2350-260-12). 14. Remove rags from transmission and oil cooler. 15. Start and run engine (TM 9-2350-260-10). Check for oil leaks. 16. Install engine shroud (page 9-3). 17. Install transmission shroud (page 9-23). End of Task TA147623 6-177