Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 251 of 772

TM 9-2350-260-20-1-2 THERMOSTATIC TRANSMISSION OIL COOLER VALVE ASSEMBLY (LEFT SIDE) TEST AND REPLACEMENT (2D ENGINE) (Sheet 3 of 6) REMOVAL: 1. Place rags under tube end fittings (A) and (B) on transmission. NOTE It may be necessary to hold adapters (C) and (D) with 1-5/8 inch wrench while removing tube end fittings (A) and (B). 2. Using 1-1/2 inch wrench, remove tube end fitting (A) from adapter (C). 3. Using 1-1/2 inch wrench, remove tube end fitting (B) from adapter (D). 4. Place rags under tube end fittings (E) and (F) on oil cooler. NOTE It may be necessary to hold adapters (G) and (H) with 1-5/8 inch wrench while removing tube end fittings (E) and (F). 5. Using 1-1/2 inch wrench, remove outside tube end fitting (E) from adapter (G). 6. Using hands, displace outside tube (J). 7. Using 1-5/8 inch wrench, remove adapter (G). Go on to Sheet 4 TA147620 6-174