TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 25 of 772
TM 9-2350-260-20-1-2 POWERPLANT REPLACEMENT (2A ENGINE) (Sheet 14 of 24) 6. Using hoist, pick up sling and install four sling hooks through four lifting eyes on powerplant. 7. Make sure sling cables hang naturally; don't twist them when inserting hook ends. WARNING Be careful when lifting powerplant. Serious injury to personnel can result from careless handling. Also, power- plant can be damaged if bumped against hull. 8. Make sure turret is turned so gun tube is pointing directly to side. Make sure turret clears grille doors. 4. Position six spring washers (B) (three on each side) on top of transmission mounts in engine compartment (late model M60 only). NOTE T-end of sling should be toward front (engine end of powerplant). 5. Make sure hoist hook is in powerplant hole of sling (Item 33, Chapter 3, Section ). Go on to Sheet 15 TA147916 5-15