TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 244 of 772
TM 9-2350-260-20-1-2 THERMOSTATIC TRANSMISSION OIL COOLER VALVE ASSEMBLY (RIGHT SIDE) TEST AND REPLACEMENT (2D ENGINE) (Sheet 3 of 7) REMOVAL: 1. Place rags under tube end fittings (A) and (B) on transmission. NOTE It may be necessary to hold adapters (C) and (D) with 1-5/8 inch wrench while removing tube end fittings (A) and (B) 2. Using 1-1/2 inch wrench, remove tube end fitting (A) from adapter (C). 3. Place rags under tube end fittings (E) and (F) at oil cooler. NOTE It may be necessary to hold adapters (G) and (H) with 1-5/8 inch wrench while removing tube end fittings (E) and (F). 4. Using 1-1/2 inch wrench, remove outside tube end fitting (E) from adapter (G). 5. Displace tube (J). 6. Using 1-5/8 inch wrench, remove adapter (G). 7. Using 1-1/2 inch wrench, remove tube end fitting (F) from adapter (H). Go on to Sheet 4 TA147615 6-167