TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 225 of 772
TM 9-2350-260-20-1-2 TRANSMISSION OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 5 of 10) 15. Using socket, remove two screws and washers (M) holding oil cooler screen to oil cooler. 16. Remove oil cooler screen. CAUTION Using another person, support oil cooler to keep it from falling while doing steps 17 through 19. 17. Using 3/4 inch wrench, remove two screws and washers (N) holding oil cooler screen mounting bracket (P) to oil cooler and oil cooler to oil cooler frame. 18. Remove oil cooler screen mounting bracket (P). 19. Using 3/4 inch wrench, remove two screws and washers (Q) holding oil cooler to oil cooler frame. 20. Remove oil cooler. Go on to Sheet 6 TA147599 6-148