Sign up to sell your inventory with NSN Lookup

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 217 of 772

TM 9-2350-260-20-1-2 TRANSMISSION OIL COOLER REPLACEMENT (2A ENGINE) (Sheet 7 of 10) INSTALLATION: 1. Position retainer and seal (A) under top frame and secure with five fasteners (B). 2. Using hands install connectors (C) and (D) in oil cooler (E). 3. Using 1-5/8 inch wrench, tighten two locknuts (F). 4. Install gasket (G) on bypass valve (H). 5. Using 1-3/4 inch wrench, install bypass valve (H) in oil cooler (E). 6. Position shroud plate (J) and oil cooler (E). 7. Using 1/2 inch socket, install two new lockwashers and screws (K) securing shroud plate (J) to oil cooler (E). 8. Position engine shroud (J) on oil cooler (E) behind engine oil cooler, then push left end of oil cooler (E) into place. Go on to Sheet 8 TA147592 6-140