TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 210 of 772
TM 9-2350-260-20-1-2 ENGINE OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 6 of 6) 16. Using 3/4 inch socket, tighten valve (L). 17. Install new washer on screw (M). 18. Using 1/2 inch socket, install washer and screw (M). 19. Check engine oil level indicator gage rod (TM 9-2350-260-10). 20. Replenish lubricating oil lost during oil cooler replacement (LO 9-2350-260-1-2). 21. Connect engine for powerplant ground hop (page 5-54). 22. Start and run engine. Check for oil leaks at oil cooler and hose connections. 23. Shut down engine. Disconnect engine from powerplant ground hop kit (page 5-67). 24. Install engine shroud (page 9-3). 25. Install powerplant (page 5-40). End of Task TA147584 6-133