TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 209 of 772
TM 9-2350-260-20-1-2 ENGINE OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 5 of 6) 10. Using 1/2 inch socket with extension through harness and into bracket, install two washes and screws (E). 11. Using 1/2 inch wrench, install oil cooler vent hose (F) at top of cooler. 12. Remove plastic material and masking tape from hose (G) and oil cooler connector (H). 13. Using 1-1/2 inch wrench, install hose (G) at oil cooler connector (H). 14. Remove plastic material and masking tape from hose (J) and oil cooler connector (K). 15. Using 1-1/2 inch wrench, install hose (J) at oil cooler connector (K). Go on to Sheet 6 TA147583 6-132