TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 208 of 772
TM 9-2350-260-20-1.2 ENGINE OIL COOLER REPLACEMENT (2D ENGINE) (Sheet 4 of 6) INSTALLATION: 1. Place oil cooler and oil cooler screen mounting bracket into place on oil cooler frame. 2. Start threads of four screws with washers (A) by hand to hold oil cooler in place. 3. Using 3/4 inch wrench, tighten screws (A). 4. Lift screen into place on oil cooler. 5. Start threads of four screws with washers (B) by hand to hold oil cooler screen in place. 6. Using 1/2 inch socket, tighten screws and washers (B). 7. Lift starter cable mounting bracket (C) into place at top of oil cooler. 8. Start threads of four screws with new lockwashers (D) by hand. 9. Using 1/2 inch wrench, tighten screws and lockwashers (D). Go on to Sheet 5 TA147582 6-131