Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download

Page 198 of 772

TM 9-2350-260-20-1-2 ENGINE OIL COOLER REPLACEMENT (2A ENGINE) (Sheet 2 of 8) NOTE Procedures are identical for both left and right coolers. REMOVAL: 1. Position drip pan under engine oil cooler (A). 2. Using 1-1/2 inch wrench, remove oil inlet hose nut (B) from engine oil cooler connector (C). 3. Using 1-1/2 inch wrench, remove oil outlet hose nut (D) from engine oil cooler connector (E). 4. After oil has drained into drip pan, use plastic material (Item 41, Appendix D) and masking tape (Item 57, Appendix D) to cover ends of hoses (B) and (D) and oil cooler connectors (C) and (E). Go on to Sheet 3 TA147572 6-121