TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 193 of 772
TM 9-2350-260-20-1-2 ENGINE OIL COOLER SCREEN REPLACEMENT (Sheet 1 of 2) TOOLS: 1/2 in. socket with 1/2 in. drive Ratchet with 1/2 in. drive 5 in. extension with 1/2 in. drive PRELIMINARY PROCEDURE: Remove powerplant (page 5-1) NOTE If removing screens on 2A engine, go to step 3. REMOVAL: 1. Using socket with extension through harness and into bracket (A), remove two screws with assembled washers (B). 2. Pull harness and bracket (A) to left side of oil cooler screen for access to screws (C). 3. Using socket, remove four screws and assembled washers (C). 4. Lift cooler screen away. INSPECTION: 1. Check screen and brackets for cracks, tears, bending, and dents. 2. Replace bad parts. Go on to Sheet 2 TA147568 6-116