TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 192 of 772
TM 9-2350-260-20-1-2 POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 9 of 9) 22. Place mounting bracket (AA) in position and, using 5/8 inch socket, tighten three screws (AB). 23. Position fuel-water separator (AC) to mounting bracket (AA). CAUTION Mounting bracket (AA) is made of aluminum. Overtightening of capscrews (AD) could strip threads. 24. Using 1/2 inch socket, install four capscrews, new lockwashers, and flat washers (AD). 25. Using screwdriver and 3/8 inch wrench, install clamp (AE) if removed. 26. Install transmission left oil cooler (page 6-149). 27. Install engine left oil cooler (page 6-131). 28. Install powerplant access covers (left bank) (page 6-91). 29. Install engine cooling fan shroud (page 9-55). 30. Install engine cooling fans (page 9-49). 31. Install centrifugal fan housing (page 9-60). 32. Install engine shroud (page 9-3). 33. Install powerplant (page 5-40). End of Task TA147567 6-115