TM-9-2350-260-20-1-2 M60 Hull Organizational Maintenance Volume 2 Download
Page 189 of 772
TM 9-2350-260-20-1-2 POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (2D ENGINE) (Sheet 6 of 9) INSTALLATION: NOTE Because of space limitations, it may be necessary to interchange like-size sockets with wrenches to get at a particular screw. 1. Install screw (A) through bracket (B). 2. Position bracket (B) and screw (A) on engine. 3. Install clamp (C) on screw (A). 4. Using 9/16 inch socket and 9/16 inch wrench, install new self-locking nut (D). 5. Using 1/2 inch socket with extension, install new self-locking nuts (E). 6. Position bracket (F) on engine. 7. Using 1/2 inch socket with extension, or 1/2 inch wrench, install nuts (G). 8. Position clamp (H) on fuel line and install screw (J) through clamp (H) and bracket (F). 9. Using 1/2 inch socket and 1/2 inch wrench, install nut (K) on screw (J). 10. Using 1/2 inch socket with extension, install four brackets (L). 11. Position frame support brackets (M) on engine and, using 11/16 inch socket, install two new self- locking nuts (N) to secure each frame support bracket (M). Go on to Sheet 7 TA147564 6-112